syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login:
To Reset the System
▼
●
If it is necessary to reset the system, use the init 6 command.
# init 6
To simply reset the system, it is not necessary to power the system off and on.
▼
To Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Shut down the Solaris OS.
At the Solaris OS prompt, issue the init 0 command to halt the Solaris OS and to
return to the ok prompt.
# init 0
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
2. Switch from the system console prompt to the SC console prompt by issuing the #.
escape sequence.
ok #.
sc>
48
SPARC Enterprise T2000 Server Installation Guide • April 2007