Connecting Cables to the Server
"To Connect the Ethernet Network Cables" on page 26
■
"To Connect the SC Network Management Port" on page 28
■
"To Connect the SC Serial Management Port" on page 27
■
"AC Power Cables" on page 29
■
In addition, the SPARC Enterprise T2000 server has serial and USB ports available
for connections to optional devices.
"TTYA Serial Port" on page 29
■
"USB Ports" on page 30
■
Note – When you are finished connecting the cables to the server, ensure that the
server can slide smoothly in and out of the rack without binding or damaging the
cables. See the section,
page
22.
Connector Locations
Use
to locate the connectors and power supplies on the back of the
FIGURE 2-14
SPARC Enterprise T2000 server.
"To Verify the Operation of the Slide Rails and the CMA" on
Chapter 2 Installing the Server
25