3. Using the SC console, issue the poweroff command.
sc> poweroff -fy
SC Alert: SC Request to Power Off Host Immediately.
4. Issue the poweron command.
sc> poweron
sc> SC Alert: Host System has Reset
5. Reconnect to the system console using the console command.
sc> console -f
Enter #. to return to ALOM.
The systems displays various messages, followed by the ok prompt.
Verifying System Functionality
After powering on the system for the first time, you can use the SunVTS™ software
to verify the functionality and performance of any installed components, as well as
its network connections. Refer to the SunVTS documentation for more information.
Chapter 3 Powering On the System
49