Fujitsu Sparc Enterprise T2000 Installation Manual page 82

Hide thumbs Also See for Sparc Enterprise T2000:

Table of Contents

net, net0, net1, net2, net3 – Specifies the network interfaces

■

full path name – Specifies the device or network interface by its full path name

■

Note – The Solaris OS modifies the boot-device variable to its full path name, not

the alias name. If you choose a nondefault boot-device variable, the Solaris OS

specifies the full device path of the boot device.

Note – You can specify the name of the program to be booted as well as the way the

boot program operates. For more information, refer to the OpenBoot 4.x Command

Reference Manual in the OpenBoot Collection AnswerBook for your specific Solaris OS

release.

If you want to specify a network interface other than an onboard Ethernet interface

as the default boot device, you can determine the full path name of each interface by

typing:

ok show-devs

The show-devs command lists the system devices and displays the full path name

of each PCI device.

SPARC Enterprise T2000 Server Installation Guide • April 2007

Table of Contents