Table of Contents
Advertisement
Product Description
Features and Components
Expansion Module Slots
A
B
Six Twisted Pair
100/1000 Mbps
Ports
(AT-9006T)
18
Figure 1 illustrates the front panel components.
Port LEDs
AT-9006SX/SC
1000BASE-SX GIGABIT ETHERNET SWITCH
1
L /A
D/C
TX
RX
TX
4
L /A
D/C
TX
RX
TX
1000Base-SX ports
Figure 1 Front Panel (Model AT-9006SX/SC)
Figure 2 shows the location of the AC connector and the Redundant
Power Supply (RPS) input connector on the back panel of the switch.
AC Power
Connector
The AT-9006T Gigabit Ethernet Switch features six twisted pair ports
with RJ-45 connectors. Each port can operate at either 100 Mbps or 1000
Mbps and, when operating at 100 Mbps, in either half- or full-duplex
mode. You can either set the speed and duplex mode manually or you
can allow the switch to do it automatically through auto-negotiation.
Each port has a maximum operating distance of 100 m (328 ft.). The
switch requires Category 5 or Enhanced Category 5 twisted pair cabling.
Each port is IEEE 802.3ab compatible and can operate as either MDI or
MDI-X. The ports are configured automatically when connected to an
end node. No crossover cables are required.
LED Color Function Key
1000BASE-SX
2
3
L /A
L /A
D/C
D/C
RX
TX
RX
5
6
L /A
L /A
D/C
D/C
RX
TX
RX
RPS
Connector
Figure 2 Back Panel
Reset Button
Fault LED
PORT ACTIVITY
RS-232
TERMINAL PORT
CLASS 1
L /A
LASER PRODUCT
LINK
ACTIVITY
DO NOT STARE
INTO BEAM
FULL DUP
HALF DUP
D/C
COL
RPS LED
Power LED
RS232 Connector
STATUS
FAULT
RPS
PWR
RESET
Advertisement
Table of Contents
