Chapter 3. Using Third Party Clients - Beward N300 Operation User's Manual

Hide thumbs Also See for N300:

page of 116

/ 116
Contents
Table of Contents
Bookmarks

Table of Contents

The N300 supports RTSP/RTP streaming.

You can use RTSP client for getting access to video in H.264, MPEG-4, MJPEG. You can

use real-time RTSP players such as VLC, Quick time, Real Player etc. as RTSP clients.

RTSP (Real Time Transfer Protocol) is a network control protocol designed for use in

entertainment and communications systems to control streaming media servers. The protocol is

used for establishing and controlling media sessions between end points. Clients of media servers

issue VCR-like commands, such as play and pause, to facilitate real-time control of playback of

media files from the server.

NOTE:

When connecting to the camera trough Internet, the rate of connection (bit rate) depends on the

parameters of a network access channel.

You can get the access to the stream via RTSP clients by the following command:

rtsp://<IP>:<PORT>/<XXXX> where <IP> is the camera IP address, <PORT> is the camera RTSP

port (default value - 554), <XXXX> is an ordinal number of profile which is used for video stream

viewing. For example, rtsp://192.168.0.99:554/video.pro. An encoding type (H.264/MPEG-

4/MJPEG) for this profile should be set in profile settings. Go to

Video – Profile. Also, you can create several profiles with different encoding type, resolution and

viewing area.

NOTE:

Detailed information about RTSP and profile setting is given in paragraphs 8.2.1, 9.1.2.

For

getting

http://<IP>:<PORT>/cgi-bin/view/image?res=<Res> where <IP> is the camera IP address,

<PORT> is the camera HTTP port (default value is 80), <Res> – the resolution of a frame. For

example, http://192.168.0.99/cgi-bin/view/image?res=320x240. The following resolutions are

available: 1280x800, 1280x720, 640x480, 320x240, 160x120.

NOTE:

For getting frames you should be authorized.

N300 Operations User Manual