Intel ISP1100 Product Manual page 61

Table 21. Boot Menu (continued)
Feature Options
After Power Stays Off
Failure
Last State (default)
Power On
On Modem Stay Off (default)
Ring
Power On
On LAN Stay Off
Power On (default)
On PME Stay Off (default)
Power On
IDE Drive Primary Master IDE
Configuration
Primary Slave IDE
Secondary Master IDE
Secondary Slave IDE
st
1 to 8-th Boot ATAPI CD-ROM (default)
Devices
Floppy
IDE-HDD
Intel UNDI, PXE-2.0 (LAN 1)
Intel UNDI, PXE-2.0 (LAN 2)
ARMD-FDD
SCSI
Disabled
Configuration Software and Utilities
st
1 IDE (default)
nd
2 IDE
rd
3 IDE
th
4 IDE
nd
2 IDE (default)
rd
3 IDE (default)
th
4 IDE (default)
Description
Determines the mode of operation if a power loss
occurs. "Stays Off" keeps system off once power is
restored. "Power On" boots the system after power is
restored. "Last State" restores the system to the same
state it was in before the power failed.
APM Mode only: Determines the action of the system
when the system power is off and the modem is ringing.
APM Mode only: Determines the action of the system
when a LAN wake up event occurs.
APM Mode only: Determines the action of the system
when a PCI Power Management Enabled wake up
event occurs.
Configures the peripheral devices. Configurable options
for other IDE devices are similar to Primary Master IDE.
Configures the boot sequence from the available
devices.
IDE-HDD = Hard disk drive.
Intel UNDI, PXE-2.0 = Network boot using PXE.
ARMD-FDD = ATAPI removable device-floppy disk
drive.
SCSI = If a SCSI device is installed, it will appear as
one of the possible boot devices with the name of
device.
61