Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Nexgrill Manuals
  4. Grill
  5. XH-300A-3310
  6. Assembly and operating instructions manual
Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual

Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual

3 burner gas grill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3 BURNER GAS GRILL
ASSEMBLY AND OPERATING INSTRUCTIONS
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open hood.
4. If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department.
WARNING
CONTACT
1-800-913-8999
DO NOT RETURN TO PLACE OF PURCHASE
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to
follow instructions could result in death, serious bodily
injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young
children away.
Do not move the appliance during use.
Turn off the gas supply at the gas cylinder after use.
Any modification of the appliance may be dangerous.
This grill can NOT be converted to natural gas.
Installer to leave instructions with the consumer and
consumer to retain them for future reference.
SERVICE LINE FOR ASSISTANCE
1
Vendor Stock No.: 720-0678
MODEL:XH-300A-3310
WARNING
1. Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
2. An LP cylinder not connected for
use shall not be stored in the
vicinity of this or any other
appliance.

Advertisement

Table of Contents
loading

Related Manuals for Nexgrill XH-300A-3310

Summary of Contents for Nexgrill XH-300A-3310

  • Page 1 Vendor Stock No.: 720-0678 MODEL:XH-300A-3310 3 BURNER GAS GRILL ASSEMBLY AND OPERATING INSTRUCTIONS DANGER WARNING If you smell gas: 1. Do not store or use gasoline or 1. Shut off gas to the appliance. other flammable vapors or liquids 2. Extinguish any open flame.
  • Page 2 WARNINGS PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, SERIOUS BODILY INJURY, AND/OR PROPERTY LOSS. READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY OR USE OF THIS OUTDOOR GAS GRILL. WARNING! Read and follow all instructions.
  • Page 3 Do not store this gas grill indoors unless cylinder is disconnected and removed from the appliance. Cylinders must always be stored outdoors out of the reach of children and must not be stored in a building, garage, or any other enclosed area. WARNING! Do not store a spare LP gas cylinder under or near this appliance.

  • Page 4: Exploded View

    Exploded view:...

  • Page 5: Parts List

    Parts List: Description Part No. Insert Drawings Fire Body 995A-FB (preassembled) Hood 995A-HD (preassembled) Hood Hardware 995A-HDHW (preassembled) Hood Handle 995A-HDH (preassembled) Hose & Regulator 995A-R (preassembled) Heat Indicator 995A-HI (preassembled) Hood Bumper 995A-RB (preassembled)
  • Page 6 Cooking Grid 995A-CG Burner 995A-BN Flame Diffuser 995A-FD Warming 995A-WR Rack Control Knob 995A-KB Base Control Knob 995A-KN Left Side Shelf ( With “A” 995A-LS sticker) Right Side burner Shelf 995A-RS (With “B” sticker)
  • Page 7 Side burner valve 995A-V (preassembled) Burner For side 995A-SB burner (preassembled) Igniter w/wire 995A-I (preassembled) Cart Front 995A-FP Panel Cart Bottom 995A-BP Panel Left Leg 995A-LL Right Leg 995A-RL Side Shelf 995A-SS Supports...
  • Page 8 Wheel Axle 995A-AX Hubcap 995A-H Wheel 995A-WL Caster 995A-C Side Burner 995A-BG Grate Grease 995A-GT Collection Tray Oil Cup 995A-CS Support Oil Cup 995A-OC...

  • Page 9: Hardware Pack

    Hose 995A-HC Controller Cylinder Bolt 995A-CB Hardware Pack Bolt: 16 PCS M6x65mm Bolt: M6 x 4 PCS 10mm Bolt: 8 PCS M5x32mm Bolt: 14 PCS M5x10mm Bolt: 2 PCS M4x10mm Nut: M8 2 PCS Nut: M6 2 PCS Wrench 1 PC Screwdriver 1 PC Notice: The wrench(part H) is only for the using of nuts: part F and G , Don’t use it on any other...

  • Page 10: Before You Start

    Parts package list of each inner box: Box No.1 includes the following parts: cart front panel (19), cart bottom panel(20), grease collection tray (29). Box No.2 includes the following parts: 2 cooking grids (8). Box No.3 includes the following parts: left side shelf (14), right side burner shelf (15), grease cup support (30), grease cup (31), wheel axle (24), flame diffuser (10), side shelf supports (23).
  • Page 11 Step 1 REQUIRES TWO PEOPLE Attach the left legs (21) (2 pcs.) to the left side “L” of the cart bottom panel (20) with bolts (A) (4 pcs.) Tighten the bolts only enough to keep the cart together. You will fully tighten later. Step 2 REQUIRES TWO PEOPLE Attach the right legs (22) (2 pcs.) to the right side “R”...
  • Page 12 Step 3 Insert the cylinder bolt (33) to the cart bottom panel as view A. NOTE: Do not screw the cylinder bolt (33) all the way in, only as far as the inner edge of the cylinder hole cutout. See View B. Step 4 Install the casters (27) into bottom of the left legs (21) as shown...
  • Page 13 Step 5 REQUIRES TWO PEOPLE Insert wheel axle (24) into holes on right legs (22). Assemble wheels (26) (2pcs) with nuts (F) (2pcs), then tighten the nuts with the wrench provided. Align hubcaps (25) to slots on wheels and press until the hubcap ‘pops’ into place. Step 6 REQUIRES TWO PEOPLE Turn the grill cart over as shown.
  • Page 14 NOTE: After assembling, leg with side shelf support attached should look as shown on the on diagram A. Step 7 Assemble each side shelf support (23) into top of each leg with bolts (C) (8pcs.) as shown NOTE: After assembling, leg with side shelf support attached should look as shown on the on inset diagram.
  • Page 15 Step 9 REQUIRES TWO PEOPLE Remove cardboard sleeve and wire ties from the hose and regulator assembly and allowing it to hang from the fire body. Carefully lower the fire body (1) onto the cart. Hook the slots on the rear edges of the fire body over the bolts on the rear legs.
  • Page 16 Step 10 Open the hood. Beware of sharp metal edges and be sure to wear protective gloves to prevent possible injury during this step of assembly. Attach the left side shelf (14) to cart as shown; make certain the left side shelf edge can be inserted into the space between the fire body and the legs as shown on view A.
  • Page 17 Step 11 Keep hood opened. Beware of sharp metal edges and be sure to wear protective gloves to prevent possible injury during this step of assembly. Remove the side shelf with burner assembly from its plastic bag, open the lid and remove the side burner grate.
  • Page 18 Step 12 REQUIRES TWO PEOPLE Beware of sharp metal edges and be sure to wear protective gloves to prevent possible injury during this step of assembly. Remove the bolts from the side burner bracket, and set them and the side burner aside, as shown on underside view B.
  • Page 19 Tighten all bolts and nuts on the cart, the firebox and the side shelves now. Step 14 Place the side burner grate (part 28) in mounting holes on the surface of side burner bottom. Step 15 Place the flame diffusers (part 10) (3 pcs) over the Burners.
  • Page 20 Step 16 Place the cooking grids (part 8) (2pcs) on the cooking area as shown. Cooking grids should have the finger holes facing towards the front of the grill. Step 17 Place warming rack (part 11) in as shown. The raised lip goes towards the rear.
  • Page 21 Step 18 Push in the grease collection tray (part 29) as shown. - Hang oil cup support (part 30) - Hang oil cup (part 31) into its support as view shown Step 19 Assemble the hose controller (part 32) to leg with bolts D (2pcs.) as shown.
  • Page 22 Step 20 Mount the gas cylinder into the bottom shelf cutout as shown on the diagram. Note: Ensure the grill is on level ground before you place the gas cylinder. Note: Lock the casters before lighting this grill. Step 21 Tighten the cylinder bolt (part 33) to secure the tank to the bottom shelf.
  • Page 23 Fully-Assembled...

  • Page 24: Connecting The Gas

    MAIN BURNER AND SIDE BURNER WITH RESPECT TO PROPER LOCATION: WARNING – ALWAYS CHECK TO ENSURE BURNERS ARE POSITIONED CORRECTLY BEFORE EACH USE Ensure main burners are installed as shown. Ensure side burner is installed as shown. CONNECTING THE GAS Connecting to a Gas Cylinder 1.

  • Page 25: Lighting The Grill

    LIGHTING THE GRILL 1. Main Burners-Open the hood of your grill. Never light your grill with the hood closed. Turn the gas cylinder valve to the “ON” position. Push and turn control knob counterclockwise slowly to the “HIGH/ ” position until a clicking sound is heard, the burner will light automatically.

  • Page 26: Manual Lighting Instructions

    MANUAL LIGHTING INSTRUCTIONS 1. Main burner-To light with match, insert long stick match in Match Holder of the Match Lighting Chain (attached under the left side shelf). Light match and place through the hole on the side of grill body until the lit end is alongside the left burner.
  • Page 27 BEFORE YOU USE YOUR GRILL (also see operation) Perform a leak test before each use. This is the only safe and sure way to detect any gas leaking from joints and connections of the grill after assembly. Follow the LEAK TEST INSTRUCTIONS. Check that the gas hose to ensure it is free of any tension, twisting, cuts, or cracks.

  • Page 28: Gas Regulator And Hose

    After cleaning Cooking Grids (2), it is recommended that you apply a light coat of cooking or vegetable oil to help protect grids. Never use aerosol, chemical or abrasive cleaners on any grill surfaces STORAGE Ensure the grill is properly cooled. Storage of this gas grill indoors is permissible only if the gas cylinder is disconnected and removed from the grill.

  • Page 29: Operation

    The gas must be turned off at the cylinder when the outdoor gas grill is not in use. Do not store this grill indoors unless cylinder is disconnected and removed from the grill. Cylinders must always be stored outdoors out of the reach of children and must not be stored in a building, garage, or any other enclosed area.

  • Page 30: Care And Maintenance

    form an oven to cook the food ‘indirectly’. Monitor the temperature using the temperature gauge on the lid. If the internal heat becomes too high, turn the burners to the ‘low’ position. It is not necessary or advisable to have all of the burners on high when the hood is closed.

  • Page 31: Troubleshooting

    Check the level of the propane. Very low levels of fuel may cause burners to go out. Perform leak test. DO NOT RETURN TO PLACE OF PURCHASE PLEASE CONTACT 1-800-913-8999 CUSTOMER SERVICE FOR ASSISTANCE, Nexgrill Industries, INC. 280 Machlin Court，City of Industry，CA 91789 USA...
  • Page 32 LIMITED WARRANTY (Model # 720-0678) Nexgrill warrants to the original consumer-purchaser only that this product (Model #720-0678) shall be free from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated below beginning on the date of purchase. The manufacturer reserves the right to require photographic evidence of damage, or that defective parts be returned, postage and or freight pre-paid by the consumer, for review and examination.

Table of Contents