Table of Contents
Advertisement
Step 12
REQUIRES TWO PEOPLE
-
Beware of sharp metal
edges and be sure to wear
protective gloves to prevent
possible injury during this
step of assembly.
-
Remove the bolts from the
side burner bracket, and set
them and the side burner
aside, as shown on
underside view B.
-
Have another person hold
the side burner valve
underneath the side burner
shelf front panel while you
attach the control knob base
(part 12) with bolts E (2
pcs.) as shown on view A.
Ensure that the screw holes
on the side burner valve
bracket line up correctly
-
Attach control knob (part
13).
Step 13
-
Pass the side burner
through the top of the side
burner shelf and insert the
front end of the side
burner into the side burner
valve as shown in view A.
-
Attach the side burner
bolts to side burner and its
bracket and tighten the
bolts, see view B.
-
Connect igniter wire to the
igniter terminal
Note: the nozzle must be
inserted into the side burner to
keep it at the center of side
burner.
18
Advertisement
Table of Contents
