Table of Contents
Advertisement
MANUAL LIGHTING INSTRUCTIONS
1. Main burner-To light with match, insert long stick match in Match Holder of the Match Lighting Chain (attached
under the left side shelf). Light match and place through the hole on the side of grill body until the lit end is
alongside the left burner. Push and turn control knob counterclockwise to the high position taking care to protect
yourself from flames.
2. When the burner is lit, turn on the remaining burners.
3. Confirm that each burner is lit before turning on the next burner.
4. Side burner- To light with match, insert long stick match in Match Holder of the Match Lighting Chain (attached
under the left side shelf). Light match and place alongside the side burner. Push and turn the side burner control knob
counter-clockwise to the high position, taking care to protect yourself from flame.
5. If the burner (main or side) fails to light, turn off the gas and contact our customer service for assistance.8:00 am to
8:00 pm EAST.
CHECKING THE FLAME
Your burners have been preset for optimal flame performance. A blue flame, possibly with a small yellow tip, is the
result of the optimal air and LP gas mixture. The flame should be checked before the initial cooking session and
periodically throughout the grilling season, especially after storing the grill over a long period of time, If the flame is
significantly yellow in color, this could be a result of a blocked burner from grease drippings or from insects building a
nest inside the burner of burner opening. Clean the port hole of the burner using a pipe cleaner or other similar shaped
instrument. When storing the appliance for long periods of time, wrap the burners in aluminum foil to prevent insects
from blocking the burner ports.
ESSENTIAL INFORMATION
Please read all instructions before using your grill.
Observe Flame Height When lit:
2"
Flame should be a Blue/Yellow color
1"
between 1＂–2＂when burner is on
0"
26
Advertisement
Table of Contents
