Summary of Contents for Nexgrill Liquid Propane Gas Grill
Page 1
ASSEMBLY & OPERATING INSTRUCTIONS Liquid Propane Gas Grill • Parts • Assembly • Safety Rules • Use and Care • Troubleshooting Note to Consumer WARNING: Read this Owner’s manual carefully and be Leave this Owner’s Manual in a convenient sure your gas grill is properly assembled, place for future reference.
Table of Contents Safety Precautions WARNING Warranty------------------------------------------------2 Combustion by products produced when using Safety Precautions--------------------------------2~4 this product contain chemicals known to the Hardware List------------------------------------------5 State of California to cause cancer, birth defects, Parts Diagram -----------------------------------------6 or other reproductive harm. Parts List------------------------------------------------7 Assembly Instructions---------------------------8~12 WARNING Lighting Instructions----------------------------12~14...
Safety Precautions • Have your LP gas tank filled by a reputable A tank of approximately 12 inches in diameter by 18- 1/2 inches high is the maximum size LP gas tank to propane gas dealer and visually inspected and re- use.
Page 4
WARNING Burner Flame Check A strong gas smell, or the hissing sound of gas indicates a serious problem with your gas grill or the LP gas tank. Failure to immediately follow the steps listed below could result in a fire or explosion that could cause serious bodily injury, death, or property damage.
Page 5
Contents for Hardware Pack The following table illustrates a breakdown of the hardware pack. It highlights what components are used in the various stages of assembly. Item Description Specification Quantity Phillips Head Screw 1/4 x 15mm 35pcs Phillips Head Screw 5/32 x 10mm 20pcs Flat Head Screw...
Model 720-0670C Parts List KEY# DESCRIPTION Q’TY KEY# DESCRIPTION Q’TY Main Lid Door Handle Warming Rack Front Door, Right Main Lid Screw Lighting Rod Temperature Gauge Door iron piece Hood Buffer Back Panel Logo Back Panel,Top Main Burner Bow l Assembly Diagonal Bar Barrier Flange, Left Side Burner Front Panel, Right...
Assembly Instructions Figure 1 CAUTION: While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces 1. Open lid of shipping carton and remove top sheet of cardboard. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.
Page 9
Figure 7 5. Attach the diagonal bar barrier to back & bottom panel using (2)5/32*10mm flat head screws.(Fig.5) 6. Attach door handles to doors using (4) 5/32 x 10mm flat head screws. (Fig. 6) 7. Attach doors to left & right side panel using (12)5/32*10 flat head screws.
Page 10
Installing Side Burner & Side Shelf Figure 12 1. Remove (2) preinstalled 1/4 x 15mm Phillips head screws from left side of grill head as shown. Do not 4pcs: 1/4 X 15mm screw in fully; leave ¼ extended for shelf assembly. (Fig.
Page 11
Installing Battery Figure 16 1.Unscrew the ignition battery cap. (Found at far left of control panel). 3 0 0 4 0 0 5 00 2 00 6 0 0 1 0 0 7 0 0 8 0 0 2.Install battery into ignition box with positive terminal facing outward.
Page 12
Connecting LP Gas Tank to LP Grill Figure 21 1.Remove the screw on tank bolt & take off the washer. Insert the tank bolt from rear of the grill and Regulator Connection reinstall the washer & screw set. From Rear of the cart, place foot ring of 21 lb tank into the hole in bottom panel.
Checking for LP gas leaks Never test for leaks with a flame. Prior to first use, at the beginning of each season, or every time your LP gas tank is changed, you must check for gas leaks. 6. To light additional burners, turn burner knob(s) to 1.
Page 14
If Grill Still Fails To Light WARNING 1. Check gas supply and connections for leaks. Check Never lean over the grill cooking area while that all wire connections are secure. lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the 2.
Cleaning and Maintenance Cleaning Exterior Stainless Steel Surfaces To ensure a proper working unit the following proper care and maintenance is suggested. •Weathering and extreme heat can cause exterior stainless steel surfaces to turn tan in color. Machine Cleaning Cooking Grids oils used in manufacturing process of stainless steel We suggest you wash your cooking grids in a mild soap can also cause this tanning color.
3. Inspect each burner for damage (cracks or holes) Regardless of which burner cleaning procedure you and if such damage is found, order and install a new use, we recommend you also complete the following burner. After installation check to ensure that gas steps to help prolong burner life.
Cooking Instructions Indirect Cooking To cook indirectly, the food should be placed on the left or right side of your grill with the burner lit WARNING on the opposite side. Indirect cooking must be Do not leave the grill unattended. done with the Lid down.
Page 18
Grill Cooking Chart FOOD Weight or thickness Temperature Time Special instructions and tips Slice or chop vegetables and dot with butter or Vegetables Medium 8 to 20 minutes margarine. Wrap tightly in heavy duty foil. Grill turning occassionally. Wrap individually in heavy duty foil. Cook Potatoes Whole Medium...