Table of Contents
Advertisement
Step 5
REQUIRES TWO PEOPLE
-
Insert wheel axle (24) into holes on right legs (22).
-
Assemble wheels (26) (2pcs) with nuts (F) (2pcs), then tighten the nuts with the wrench
provided.
-
Align hubcaps (25) to slots on wheels and press until the hubcap 'pops' into place.
Step 6
REQUIRES TWO PEOPLE
-
Turn the grill cart over as shown.
-
Align the front panel (19) mounting holes with holes on the inside of the legs.
-
Use bolts (D) (4pcs.)
-
Tighten the bolts only enough to keep the cart together. You will fully tighten later.
13
Advertisement
Table of Contents
