Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual page 14

Step 7
- Assemble each side shelf support (23) into top of each leg with bolts (C) (8pcs.) as shown
NOTE: After assembling, leg with side shelf support attached should look as shown on the on
inset diagram.
Step 8
- Insert bolt (A) (2pcs.) into the lower bolt holes of the back legs with nut (G) (2pcs.)
NOTE: Don't tighten the nuts yet. After assembling, there should be at least 1/2" (2 Cm.) of the
bolt threads showing between the nuts and the inner sides of the legs, as shown on the inset
diagram. You will be asked to fully tighten the nuts later.
14
NOTE:
After assembling,
leg with side shelf
support attached
should look as
shown on the on
diagram A.