Gas Regulator And Hose - Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual

3 burner gas grill
Table of Contents

Advertisement

After cleaning Cooking Grids (2), it is recommended that you apply a light coat of cooking or vegetable oil
to help protect grids.
Never use aerosol, chemical or abrasive cleaners on any grill surfaces
STORAGE
Ensure the grill is properly cooled.
Storage of this gas grill indoors is permissible only if the gas cylinder is disconnected and removed from the
grill.
Store the grill in a cool dry place.
Always disconnect the gas cylinder and store it in a safe place, never store a gas cylinder on its side.
Never store a gas cylinder in a building, garage or any other enclosed area.
If you intend to leave your grill outside make sure it is protected from the elements by a heavy-duty cover (not
included).
Keep outdoor cooking gas grill area clear and free form combustible materials, gasoline and other flammable
vapors and liquids.
Although the grill is manufactured from quality materials, including some parts manufactured from stainless steel,
storage out in the open may result in corrosion of some exterior surfaces or components. We recommend you
protect your grill from the weather by covering it with a grill cover, tarp, or other protective material or device.
In addition, a commercial stainless steel cleaner or wipe will keep the stainless steel components maintain their
as-new appearance.
IMPORTANT INFORMATION
This product is for outdoor use only. Do not use indoors. Do not use below ground level.
Do not store gas cylinders below ground level. LP gas is heavier than air so if a leak occurs the gas will collect at a
low level and could ignite in the presence of a flame or spark.
Do not store or use LP gas cylinders on their side as this could allow liquid gas into the supply pipes with serious
results.
Leak test your grill before each use. Leak test the hose connections each time you reconnect the gas cylinder.
Always turn off the gas at the cylinder when not in use.

GAS REGULATOR AND HOSE

This grill is designed for use with LPG (liquid petroleum gas) bottled gas. This grill can not be converted to
natural gas. Any attempt to convert this grill to natural gas will void any and all warranties and may result in an
unsafe condition.
Any LP gas supply cylinder used with this grill must be approximately 12 inches in diameter and 18 inches high.
The maximum fuel capacity is 80% and is approximately 20 pounds of propane. The maximum weight of a
properly filled cylinder is approximately 38 pounds (47.7 lbs. Nominal water capacity). The LP cylinder must
have a shut-off valve terminating in a Type 1 LP gas cylinder valve outlet.
All LP gas cylinders used with this grill shall be constructed and marked in accordance with the specifications for
LP gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada,
CAN/CAS-B339 Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as
applicable; and shall be provided with a listed overfilling prevention device.
The LP gas cylinder must have a Type 1 compatible cylinder with a Type 1 cylinder valve that has a back-check
valve, which does not permit gas flow, until a positive seal has been obtained.
The cylinder must be arranged for vapor withdrawal. It must also include a collar to protect the cylinder valve. A
safety relief device having direct communication with the vapor space of cylinder must be provided. This will
expel high pressure gas if the cylinder is overfilled or overheated which could result in fire or explosion.
28

Advertisement

Table of Contents
loading

Table of Contents