Before You Start; Assembly - Note: Two People Required For Assembly; Assembly Instructions - Nexgrill XH-300A-3310 Assembly And Operating Instructions Manual

Parts package list of each inner box:
Box No.1 includes the following parts: cart front panel (19), cart bottom panel(20), grease collection tray (29).
Box No.2 includes the following parts: 2 cooking grids (8).
Box No.3 includes the following parts: left side shelf (14), right side burner shelf (15), grease cup support (30), grease
cup (31), wheel axle (24), flame diffuser (10), side shelf supports (23).
Box No.4 includes parts: control knob base (12), control knob (13), hubcap (25), wheel (26), caster (27), hose
controller (32), cylinder bolt (33)

ASSEMBLY INSTRUCTIONS

(Estimated time for assembly will be 60 minutes)

Before You Start

When you are ready to start, make sure that you have the right tools at hand, plenty of space and a
clean dry area for assembly.
Please note, although care has been taken in the manufacture of the various parts of this grill, some
of the parts may have sharp metal edges which may cut your hands during the assembly process.
We strongly recommend you use gloves to protect your hands from inadvertent cuts. Lightweight
cloth gardening gloves are well suited for this task as they protect your hands without reducing your
dexterity.
Assembly – Note: Two People Required for Assembly
Using knife or box cutter cut open carton. Flatten box by carefully cutting the 4 corners to expose
all grill parts for assembly. It is recommended that the carton is spread out on the floor and used as a
protective surface during assembly.
Lay out all screws and check lengths before assembly.
Remove all packaged parts from the inside of the grill body and additional parts packaged inside the
carton, before assembling.
This product is for OUTDOOR USE ONLY.
NEVER use indoors, in an enclosed area or below ground level.
NEVER use an adjustable regulator with this grill. Use only the regulator and hose supplied.
Assemble on a level surface.
Although a screwdriver and wrench are included in the hardware pack and are sufficient for the
proper assembly of the grill, you may also want to use a pair of slip joint pliers to make the
tightening of the bolts easier to accomplish.
Preparation
Unpack and inspect all parts listed. If you believe you have missing parts, please check all the boxes which contain
parts of the grill. Some parts are shipped in place or pre-assembled.
If you have damaged or missing parts, DO NOT RETURN TO THE STORE.
Please contact The Grill Services toll free at 1-800-913-8999.
10