Clearing Status; Checking The Device Number; Checking The Version Information; Registering Your Home - Pioneer AVIC-F50BT Operation Manual

Customising preferences
p When tyres have been changed or
chains fitted, turning on the Speed
Pulse allows the system to detect the
fact that the tyre diameter has changed,
and automatically replaces the value for
calculating distance.
p If a separately sold speed pulse genera-
tor (ND-PG1) is connected, the distance
calculation value cannot be replaced
automatically.

Clearing status

You can delete the learned results stored in
"Distance", "Speed Pulse" or "Learning".
1 Touch [Distance] or [Speed Pulse].
The following message appears.
2 Touch [Yes].
Clears the results stored in "Distance" or
"Speed Pulse".
3 Touch [Learning].
4 Touch [Reset all].
Clears all leaning results.
p Touch [Reset all] for the following cases:
! After changing the installation position
of the navigation system
! After changing the installation angle of
the navigation system
! After moving the navigation system to
another vehicle
# If you touch [Reset distance], all learned re-
sults stored in "Distance" are cleared.

Checking the device number

Display the "Information" screen.
1
= For details, refer to Displaying the informa-
tion screen on page 131.
2 Touch [Navigation Info].
The device number of your navigation system
is displayed.
3 Check the device number.
Checking the version
information
Display the "Information" screen.
1
= For details, refer to Displaying the informa-
tion screen on page 131.
2 Touch [Version Information].
The current version is displayed.
3 Check the version information.
4 Touch [OK].

Registering your home

Registering your home position saves time
and effort. Also, routes to home positions can
be calculated easily with a single touch of the
key from the "Destination". The registered
home position can also be modified later.
p If your home has been already registered,
delete the registered home location first.
= For details, refer to Deleting registered
contacts on page 72.
1 Search for a location.
= For details, refer to Chapter 4.
After searching for a point, the map of the se-
lected position is displayed.
2 Press the HOME button to display the
"Top Menu" screen.
3 Touch [Destination].
Chapter
26
133
Engb