Checking And Modifying The Current; Displaying The Route Overview; Checking The Current Itinerary - Pioneer AVIC-F50BT Operation Manual

Checking and modifying the current route

Displaying the route overview

p The route overview is only active when the
route is set.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
1 2
1 Profile
You can confirm the set route.
= For details, refer to Checking the current
itinerary on page 47.
2 Options
You can add a waypoint along the route and
set the route which passes through it. You
can also change search criteria.
= For details, refer to Modifying the route
calculation conditions on page 48.
= For details, refer to Editing waypoints on
page 49.
3 skip waypt.
If you no longer need to stop by the regis-
tered waypoint, you can search a route
again by supposing that you have already
passed the waypoint.
= For details, refer to Skipping a waypoint
on page 50.
4 Demo ON
You can confirm the route from the demon-
stration of the driving of the route from the
starting point and final destination.
= For details, refer to Using the demonstra-
tion guidance on page 50.
5
3 4
Demo OFF
While the demonstration guidance is run-
ning, [Demo OFF] appears. Touching the
key finishes the demonstration guidance.
5 Cancel Route
You can delete the current route.
= For details, refer to Cancelling the route
guidance on page 51.
2 Touch the item that you want to re-
fine.

Checking the current itinerary

You can check the route details.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [Profile].
The "Route Profile" screen appears.
1
1 Current position
2 Guidance point
3
The screen is closed.
p When you display the "Route Profile"
screen by touching [Profile] on the
Route confirmation screen, [OK] ap-
pears.
Touching this key starts the route gui-
dance on the displayed route.
Chapter
06
3
2
47
Engb