Messages For Bluetooth Functions - Pioneer AVIC-F50BT Operation Manual

Appendix
Appendix

Messages for Bluetooth functions

When problems occur with Bluetooth functions, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or your nearest Pioneer service centre.
Message
Currently unable to register
Unable to connect the device.
Try again later.
Unable to register Bluetooth
device.
Could not find any available
phone.
Unable to search for available
devices.
Device search failed.
Unable to change device
name.
Currently unable to delete.
Delete failed
178
Engb
Cause
The Bluetooth device that you want
to register is under communication
such as transferring phone book.
This navigation system is trying to
connect to the Bluetooth device
while performing the following op-
erations with another device.
! Registering the Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
An error has occurred.
No available phone is in the sur-
rounding area when the system
searches for connectable mobile
phones featuring Bluetooth wireless
technology.
This navigation system is trying to
search for available device while
performing following operations.
! Registering the Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
! Deleting the registered Bluetooth
device
An error has occurred.
An error has occurred.
This navigation system is trying to
delete the registered Bluetooth de-
vice while performing the following
operations.
! Using the hands-free phoning
! Registering Bluetooth device
! Setting to connect the Bluetooth
device
! Transferring the phone book
An error has occurred.
Action (Reference)
After finishing the communication, register
the Bluetooth device again.
After the operation of another device is com-
plete, reconnect the Bluetooth device.
Set the "Bluetooth On/Off" to "Off", and
then set to "On". Subsequently, operate to
register again.
! Activate the target phone's Bluetooth wire-
less technology.
! Check whether your mobile phone is acti-
vated and, whether the distance to your mo-
bile phone is too far.
After finishing the operation, search for avail-
able devices again.
Set the "Bluetooth On/Off" to "Off", and
then set to "On". Subsequently, search for
available devices again.
Set the "Bluetooth On/Off" to "Off", and
then set to "On". Subsequently, operate to
change the device name again.
After finishing the operation, delete the
Bluetooth device again.
Set the "Bluetooth On/Off" to "Off", and
then set to "On". Subsequently, operate to de-
lete the Bluetooth device again.