Interruption Icon Status; Switching The Sound Quality Of The Fm Tuner; Operating By Hardware Buttons - Pioneer AVIC-F50BT Operation Manual

Chapter
12 Using the radio
PI Seek operation
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the naviga-
tion system will automatically search for a dif-
ferent station with the same programming.
During the search, "PI Seek" is displayed and
the output is muted. Muting is discontinued
after completion of the PI Seek, whether or not
a different station is found.
Activating the Auto PI seek for
preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
p The default setting for Auto PI Seek is off.
= For details, refer to Switching Auto PI seek
on page 149.

Interruption icon status

p This function can only be used on the FM
band.
When the information interruption setting is
enabled, the interruption icon is displayed.
The interruption icon display may change de-
pending on the programme reception status.
= For details of the operation, refer to Receiv-
ing traffic announcements on page 80.
= For details of the operations, refer to Using
news programme interruption on page 81.
p The interruption icon is displayed on all AV
source operation screens.
TRFC indicator
Indicator Meaning
Information interruption is activated,
but you will not receive data since there
is none.
Information interruption is activated,
and data currently being received.
(No dis-
Information interruption is deactivated.
play)
82
Engb
NEWS indicator
Indicator Meaning
Information interruption is activated,
but you will not receive data since there
is none.
Information interruption is activated,
and data currently being received.
(No dis-
Information interruption is deactivated.
play)
Switching the sound quality of
the FM tuner
p This function can only be used on the FM
band.
You can select the sound quality from the
three settings according to the circumstances
of use.
on the "Radio" screen.
1 Touch
The "Function" menu appears.
2 Touch [Tuner Sound].
The "Tuner Sound" menu appears.
3 Touch the item you want to set.
! Stable:
Switch to settings that prioritise noise pre-
vention.
! Standard:
Switch to the standard settings.
! Hi-Fi:
Switch to the settings that gave priority to
the sound quality.
Operating by hardware
buttons
Pressing the TRK button
You can move the preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.