Chapter
28
Other functions
Setting the anti-theft function
You can set a password for the navigation sys-
tem. If the back-up lead is cut after the pass-
word is set, the navigation system prompts for
the password at the time of next boot up.
Setting the password
Display the "System Settings" screen.
1
= For details, refer to Displaying the screen for
system settings on page 143.
2
Touch Area1, followed by Area2, and
then touch and hold Area3.
Area1
3
Touch [Set Password].
The password setting screen appears.
4
Enter the password you want to set.
p 5 to 16 characters can be entered for a
password.
5
Touch [OK].
6
Enter a password hint.
p Up to 40 characters can be entered for a
hint.
7
Touch [OK].
The "Password confirmation" screen ap-
pears.
p If you want to change the password cur-
rently set, enter the current password and
then enter the new one.
8
Check the password, and then touch
.
166
Engb
Area2
Area3
Entering the password
On the password input screen, you must enter
the current password.
1
Enter the password.
2
Touch [OK].
If you enter the correct password, the naviga-
tion system will be unlocked.
Deleting the password
The current password can be deleted.
Display the "System Settings" screen.
1
= For details, refer to Displaying the screen for
system settings on page 143.
2
Touch Area1, followed by Area2, and
then touch and hold Area3.
3
Touch [Clear password].
A message confirming whether to delete the
password appears.
4
Touch [Yes].
The password setting screen appears.
A message confirming a password hint ap-
pears.
5
Touch [OK].
6
Enter the current password.
7
Touch [OK].
Forgotten password
Contact the nearest authorised Pioneer Ser-
vice Station.