Adjusting Loudness; Using The Equaliser - Pioneer AVIC-F50BT Operation Manual

Customising preferences
2 Touch [FAD/BAL].
When "Sub. W" is selected in "Rear SP",
[Balance] will be displayed instead of
[FAD/BAL] and the front/rear speaker balance
cannot be adjusted.
= For details, refer to Setting the rear output
on page 158.
3 Touch or to adjust front/rear
speaker balance.
Each time you touch
speaker balance moves towards the front or
rear.
"Front 15" to "Rear 15" is displayed as the
front/rear speaker balance moves from the
front to rear.
Set "Front" and "Rear" to "0" when using a
dual speaker system.
4 Touch or to adjust the left/right
speaker balance.
Each time you touch
speaker balance moves towards the left or
right.
"Left 15" to "Right 15" is displayed as the left/
right speaker balance moves from left to right.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volumes.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [Loudness].
or , the front/rear
or , the left/right
3 Touch [On].
# If you touch [Off], the setting is turned off.
4 Touch or , and select the level
you want to set.
Low — Mid — High

Using the equaliser

The equaliser lets you adjust equalisation to
match the vehicle interior acoustic character-
istics as desired.
Recalling equaliser curves
There are seven stored equaliser curves that
you can easily recall at any time. Here is a list
of the equaliser curves:
Equaliser curve
S.Bass (Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful is a curve in which low- and high-pitched
sounds are boosted.
Natural is a curve in which low- and high-pitched
sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
p When "Flat" is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
"Flat" and a set equaliser curve.
p You cannot select "Custom1" and "Cus-
tom2" when "Auto EQ" is "On".
= For details, refer to Using the auto-ad-
justed equaliser on page 153.
Chapter
26
151
Engb