Viewing Information About A Specified Location - Pioneer AVIC-F50BT Operation Manual

How to use the map
1
1 Cursor
2 Distance from the current position
3 Registration
You can register the location indicated by
the current cursor position as "Favourites".
= For details, refer to Registering and edit-
ing locations on page 52.
4 Vicinity
You can search for the POIs near the cursor
position by selecting a category.
= For details, refer to Searching for a nearby
POI on page 42.
5 Go here
You can search for a route to a destination
indicated by the cursor position.
= For details, refer to Setting a route to
your destination on page 46.
3 To slightly adjust the position, touch
[Adju.] first, then the direction arrow
(eight directions) in which you want to
make slight adjustments.
Each touch of the direction arrow moves the
map little by little.
The direction arrows disappear by touching
[Adju.] again.
p Pressing the MAP button returns the map
to the current position.
Viewing information about a
2
specified location
For the locations you have searched using the
destination menu, you can display the detailed
3
information as long as the information related
4
to the location is stored in the system.
5
Search for a location using the "Desti-
1
nation" screen.
= For details, refer to Chapter 4.
2 Touch
The "Details" screen appears.
3 Touch the item that you want to check
the detailed information.
The information for the specified location ap-
pears.
4
The information shown varies according to the
location. (There may be no information for that
location.)
1
Displays the map screen.
2 Go here
Searches for the route to the displayed loca-
tion.
p If the route is already set, the displayed
location can be modified to the destina-
tion or a waypoint.
.
1
3 2
Chapter
03
33
Engb