Switching The Road On Which You Are Driving; Displaying The Screen For Navigation Function Settings; Setting The Speed Limit Display; Changing The Road Colour - Pioneer AVIC-F50BT Operation Manual

Chapter
26 Customising preferences
Switching the road on
which you are driving
When you are driving in the area where an or-
dinary road and toll road run parallel, and if
the system calculates your vehicle position to
be on a road opposite from the one on which
you are actually driving, you can switch your
vehicle position to the right road, i.e. either the
ordinary road or the toll road.
Display the "Volume/Position adjust-
1
ment" screen.
= For details, refer to Displaying the adjust-
ment and correction screen on page 134.
2 Touch [Find alternative location].
The vehicle position is corrected to the right
type of road.
p The vehicle position may not be corrected
in some cases.
p During the route guidance, the vehicle posi-
tion is corrected before the route is
searched again.
Displaying the screen for
navigation function settings
1 Press the HOME button to display the
"Top Menu" screen.
2 Touch .
The "Edit/Settings" menu appears.
3 Touch [Navi settings].
The "Navi Settings" menu appears.
136
Engb
4 Touch the item you want to configure.
5 Touch to end the setup.

Setting the speed limit display

Selects whether to display or hide the speed
limit of the current road.
Speed Limit
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation function settings on page 136.
2 Touch [Map Display].
3 Touch [Show Speed Limit].
The setting screen appears.
4 Touch the item you want to set.
! Hide (default):
Hides the speed limit on the map.
! View:
Displays the speed limit on the map.

Changing the road colour

You can set the road colour to bluish or red-
dish.
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation function settings on page 136.