Sorting Waypoints; Skipping A Waypoint; Using The Demonstration Guidance - Pioneer AVIC-F50BT Operation Manual

Chapter
06 Checking and modifying the current route
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [Options], and then touch [Way-
points].
The "Waypoints List" screen appears.
3 Touch [Delete].
The "Delete" screen appears.
4 Select the waypoint that you want to
delete.
A tick mark appears next to the selected way-
point.
5 Touch [Delete].
A message confirming whether to delete the
waypoint appears.
6 Touch [Yes].
The selected waypoint will be deleted from the
list.
Touch [OK] on the "Waypoints List"
7
screen.
The route is recalculated, and the Route con-
firmation screen appears.
8 Touch [OK].
A map of the current position appears.

Sorting waypoints

You can sort waypoints and recalculate the
route.
p You cannot sort waypoints that you have al-
ready passed.
1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [Options], and then touch [Way-
points].
The "Waypoints List" screen appears.
50
Engb
3 Touch [Sort], and then touch [Manual].
You can specify the order of waypoints to sort.
# If you touch [Automatic], the waypoints are
sorted in the order of the nearest one from the
current location.
4 Touch the waypoint or destination.
Put them in the desired order.
5 Touch [OK].
The "Waypoints List" screen appears.
Touch [OK] on the "Waypoints List"
6
screen.
The route is recalculated, and the Route con-
firmation screen appears.
7 Touch [OK].
A map of the current position appears.

Skipping a waypoint

1 Display the editing route screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [skip waypt.].
The next waypoint is considered to have al-
ready been passed through, and a route is
searched.
Using the demonstration
guidance
You can confirm the route by making the navi-
gation system run to the destination from the
point of departure on screen.