Section
D (
Operating this unit
Switching the ring tone
1
Display the function menu.
Refer to Introduction to advanced operations
on page 37.
2
Use MULTI-CONTROL to select
RING TONE in the function menu.
3
Push MULTI-CONTROL left or right to
select the desired setting.
OFF (off)-1-2-3
Making a call by entering
phone number
o
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1
Display the function menu.
Refer to Introduction to advanced operations
on page 37.
2
Use MULTI-CONTROL to select
NUMBER DIAl.
• You can also press DIRECT on the remote con-
trol to enter in this menu from the standby dis-
play.
3
Push MULTI-CONTROL up or down to
select a number.
•
You can also perform the same operation by
pressing 0 to 9 on the remote control.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
•
Up to 24 digits can be entered.
5
When you finish entering the number,
press MULTI-CONTROl.
Call confirmation appears.
• You can also perform the same operation by
pressing thumb pad on the remote control.
6
Press MULTI-CONTROL again to make a
call.
•
You can also perform the same operation by
pressing
c..
on the remote control.
®
En
)
7
To end the call, press
~.
•
You can also perform the same operation by
pressing
~
on the remote control.
Clearing memory
1
Display the function menu.
Refer to Introduction to advanced operations
on page 37.
2
Use MULTI-CONTROL to select
CLR MEMO.
3
Push MULTI-CONTROL up or down to
select an item.
PH BOOK
(phone book)-ALL (delete all
memory)-PRESET
(preset phone numbers)-
RECENT
(call history)
•
If you want to clear the entire Phone Book,
call history list and preset phone number, select
ALL.
4
Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
CLEAR MEMORY YES
is displayed. Clearing
memory is now on standby.
•
If you do not want to clear the memory that
you have selected, push MULTI-CONTROL left.
The display reverts to normal.
5
Press MULTI-CONTROL to clear the
memory.
CLEARED
is displayed and data on the se-
lected item is cleared from this unit's memory.
Changing the phone book
display order
1
Display the function menu.
Refer to Introduction to advanced operations
on page 37.
2
Use MULTI-CONTROL to select
PH. B. NAME VIEW.
INVERT NAMES YES
is displayed.
3
Press MULTI-CONTROL to change the
name view order.
INVERTED
is displayed.