Pioneer AVIC-F50BT Operation Manual page 173

Appendix
Symptom
No video output from the con-
nected equipment.
The audio or video skips.
No sounds are produced.
The volume level will not rise.
The icon 9 is displayed, and op-
eration is impossible.
The picture stops (pauses) and
the navigation system cannot be
operated.
The picture is stretched, with an
incorrect aspect ratio.
A parental lock message is dis-
played and DVD playback is not
possible.
The parental lock for DVD play-
back cannot be cancelled.
Playback is not with the audio
language and subtitle language
settings selected in "DVD/
DivX® Setup".
The picture is extremely unclear/
distorted and dark during play-
back.
iPod cannot be operated.
Cause
The "AV1 Input" or "AV2 Input" set-
ting is incorrect.
The navigation system is not firmly
secured.
Cables are not connected correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback.
The operation is not compatible
with the video configuration.
The reading of data is impossible
during disc playback.
The aspect setting is incorrect for
the display.
The parental lock is on.
The code number is incorrect.
The DVD playing does not feature
dialogue or subtitles in the lan-
guage selected in "DVD/DivX®
Setup".
The disc features a signal to prohibit
copying. (Some discs may have
this.)
The iPod is frozen.
An error has occurred.
Cables are not connected correctly.
Action (Reference)
Correct the settings. (Page 122)
Secure the navigation system firmly.
Connect the cables correctly.
There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
Stop playback once, then restart.
Select the appropriate setting for that image.
(Page 101)
Turn the parental lock off or change the level.
(Page 101)
Input the correct code number. (Page 101)
Switching to a selected language is not possi-
ble if the language selected in "DVD/DivX®
Setup" is not recorded on the disc. (Page
100)
Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
! Reconnect the iPod with the USB interface
cable for iPod / iPhone.
! Update the iPod software version.
! Reconnect the iPod with the USB interface
cable for iPod / iPhone.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
off (ACC OFF). Then restart the engine, and
turn the power to the navigation system back
on.
! Update the iPod software version.
Connect the cables correctly.
Appendix
173
Engb