Setting The Keyboard Language With Application For Iphone; Setting The Rear Output - Pioneer AVIC-F50BT Operation Manual

Chapter
26 Customising preferences
For smartphone users
Display the "App settings" screen.
1
= For details of the operations, refer to Dis-
playing the screen for app settings on page
157.
2 Touch [App connection settings].
The "App connection settings" screen ap-
pears.
3 Touch [Android].
The connection setting of smartphone
(Android device) is enabled.
Setting the keyboard language
with application for iPhone
p This function is only available in AppRadio
Mode on the iPhone.
You can use the keyboard in AppRadio Mode
by setting the language of the keyboard for
iPhone.
1 Set the language preference for the
keyboard of the iPhone.
Display the "App settings" screen.
2
= For details of the operations, refer to Dis-
playing the screen for app settings on page
157.
3 Touch [App keyboard settings].
The "App keyboard selection" screen ap-
pears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
158
Engb

Setting the rear output

The navigation system's rear output can be
used for a full-range speaker or subwoofer
connection. If you switch "Rear SP" to
"Sub. W", you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the navigation system is set for a rear
full-range speaker connection ("Full").
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting. (When you use the product
without RCA rear output, this setting only
applies to the rear speaker leads.)
p "Rear SP" can be set when all of the follow-
ing conditions are met.
! The AV source is turned off.
! All iPod, smartphone and external sto-
rage devices are not connected to this
navigation system.
1 Disconnect the iPhone or smartphone
device.
2 Press the HOME button to display the
"Top Menu" screen.
3 Touch .
The "Edit/Settings" screen appears.
4 Touch [AV Settings].
The "AV Settings" menu appears.
5 Touch [Rear SP].
6 Touch [Full] or [Sub. W].
! Full (default):
When no subwoofer is connected to the
rear output, select "Full".
! Sub. W
When a subwoofer is connected to the rear
output, select "Sub. W".