Factory Functions And Factory Reset; Restore To Factory Default Via Lcd Menu; Firmware Version 1.0.3.26 - Grandstream Networks GXP2200 User Manual

FACTORY FUNCTIONS AND FACTORY RESET

FACTORY FUNCTIONS
To check the functions of GXP2200 LED, LCD, Keyboard and Audio, open the GXP2200 onscreen
MENU->Diagnosis to perform the diagnosis when troubleshooting the device. Tap on the option and
follow the instructions on each to perform:

LCD Diagnosis

LCD Off

Keypad Diagnosis

Touch Screen Diagnosis

LED Diagnosis

BLF Expansion Board Diagnosis

Audio Loopback

RESTORE TO FACTORY DEFAULT VIA LCD MENU

Warning:
Restoring the Factory Default Settings will delete all configuration information on the phone. Please
backup or print all the settings before you restore to the factory default settings. Grandstream is not
responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
There are two methods to restore the GXP2200 to the factory default settings.
1. On GXP2200 idle screen, press MENU button
MENU->Settings;
2. Tap on Advanced Settings->Factory Reset, the following figure will show;

Firmware Version 1.0.3.26

and tap on Settings. Or go to onscreen
GXP2200 USER MANUAL Page 158 of 159