Advanced Setting/Mpk Ext Settings (For Gxp2200Ext Board 1/2/3/4); Firmware Version 1.0.3.26 - Grandstream Networks GXP2200 User Manual

ADVANCED SETTING/MPK EXT SETTINGS (FOR GXP2200EXT BOARD 1/2/3/4)

Key Mode
Account
Name
UserID
MPK ID
Display Format

Firmware Version 1.0.3.26

Assigns a function to the Multi-Purpose Key on the GXP2200EXT.
The key mode options are:

Speed Dial

Press to dial the extension configured in UserID field.

Busy Lamp Field (BLF)

Monitor the extension status as configured in UserID field.

Call Transfer
Transfer the current active call to the extension configured in UserID
field.

Call Intercom

Intercom/paging to the extension configured in UserID field.

Speed Dial via Active Account

Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured extension using account 2.

Dial DTMF

Dial the DTMF digits filled in UserID field during the call.

Eventlist BLF

Similar to the BLF option but in this mode the PBX collects
information from the phones and sends it out in one single SIP
NOTIFY message. The PBX server has to support this feature.
When selected, eventlist URI needs to be filled out under web
GUI->Advanced Settings->MPK General Settings.

Call Park
Enter the UserID as the call park/pickup extension provided from the
PBX server to park or pick up the call. The PBX server has to support
this feature.
Selects the SIP Account used for the multi-purpose keys.
Configures the display name for the multi-purpose key.
Configures the UserID for the corresponding multi-purpose key mode.
This identifies the "MPK ID x" for "MPK x". The default number is from
1-160 for 160 MPKs in 4 GXP2200EXT boards.
For example, if MPK 1 's MPK ID is changed from 1 to 5, users will see
the configuration saved on MPK 5.
Configures the display format for the multi-purpose keys. Users could
GXP2200 USER MANUAL Page 132 of 159