Firmware Version 1.0.3.26 - Grandstream Networks GXP2200 User Manual

Auto Answer
Send Anonymous
Anonymous Call Rejection
Call Log
Special Feature
Feature Key Synchronization
Enable Call Features
No Key Entry Timeout (s)
Ring Timeout (s)
Transfer on 3-way Conference
Hang up
Use # as Dial Key
Conference URI

Firmware Version 1.0.3.26

Contact header information for attended transfer. The default setting is
"No".
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. If set to "Enable
Intercom/Paging", it will answer the call based on the SIP info header
sent from the server/proxy. The default setting is "No".
If set to "Yes", the "From" header in outgoing INVITE messages will be
set to anonymous, essentially blocking the Caller ID to be displayed.
The default setting is "No".
If set to "Yes", anonymous calls will be rejected. The default setting is
"No".
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is logging
all calls. The default setting is "Log All".
Different soft switch vendors have special requirements. Therefore users
may need select special features to meet these requirements. Users can
choose from Standard, Broadsoft, CBCOM, RNK, China Mobile, ZTE
IMS, Mobotix, ZTE NGN, or Huawei IMS depending on the server type.
The default setting is "Standard".
This feature is used for Broadsoft call feature synchronization. When it's
set to Broadsoft, DND and Call Forward features can be synchronized
with Broadsoft server.
If set to "Yes", the local call feature code on the phone can be used.
Otherwise, the feature code will need to be provided from the server
side. The default setting is "No".
Defines the timeout (in seconds) for no key entry. If no key is pressed
after the timeout, the digits will be sent out. The default value is 4
seconds.
Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60.
If set to "Yes", when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other
parties will remain in the conference call.
Allows users to configure the "#" key as the "Send" key. If set to "Yes",
the "#" key will immediately dial out the input digits. In this case, this key
is essentially equivalent to the "Send" key. If set to "No", the "#" key is
included as part of the dialing string.
Configures Conference URI for N-way conference (Broadsoft standard).
GXP2200 USER MANUAL Page 126 of 159