Maintenance Page Defination; Maintenance/Network Settings; Firmware Version 1.0.3.26 - Grandstream Networks GXP2200 User Manual

Note:
For more details on GXP2200EXT and GXP2200EXT Multi-Purpose Key configurations, please refer to
the GXP2200EXT user manual in the website:
http://www.grandstream.com/support

MAINTENANCE PAGE DEFINATION

MAINTENANCE/NETWORK SETTINGS

Address Type
DHCP Host name (Option 12)
DHCP Vendor Class ID
(Option 60)
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Enable PPPoE
PPPoE Account ID
PPPoE Password
Layer 3 QoS for SIP

Firmware Version 1.0.3.26

select display "Phonebook Name", "UserID", or "UserID(Phonebook
Name)". The "Phonebook Name" is the name saved in GXP2200
Contacts. The default setting is "Phonebook Name".
Allows users to configure the appropriate network settings on the phone.
Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to
"DHCP".
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
Used by clients and servers to exchange vendor class ID. The default
setting is GXP.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 address when static IP is used.
Enter the DNS Server 2 address when static IP is used.
Select "Yes" to enable PPPoE.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS.
GXP2200 USER MANUAL Page 133 of 159