Part Names And Functions; Front Panel - Alinco DR-135T MkII Instruction Manual

4. Part Names and Functions

Front Panel

10 11
12
•Primary Functions
No. Key Function
1 PWR
Power turns ON / OFF whenever switch is pressed.
2 Volume knob Adjusts the volume level.
3 Dial Changes the frequency, memory channel and scan direction.
4 FUNC/SET
Sets the function mode to access additional settings.
5 V/M/MW Switches between VFO mode and memory mode.
6 MHZ/SHIFT
Changes the frequency in 1 MHz steps.
7 TS/DCS/LOCK Sets the tone squelch and DCS setting.
8 CALL/H/L Switches to CALL mode.
9 SQL/D
Sets the squelch level
10 DATA Terminal Used in clone and theft alarm functions.
11 TX Light indicator Lights during transmission.
12 Mic. Connector Connection port for supplied microphone.
•Functions which can be activated while F appears, after
pressing the FUCN Key.
No. Key Function
4 FUNC/SET
Confirms selection of other functions and exits the function mode.
5 V/M/MW Write in to memory channel.
6 MHZ/SHIFT
Sets the shift direction and the offset frequency.
7 TSDCS/LOCK Sets the key lock function.
8 CALL/H/L Switches between HI, MID, and LOW power transmission.
9 SQL/D
Accesses the packet communication mode. / AM reception mode (DR-235T only)
4 5 6 7
2
8 9 3
1
9