9. Remote Control Operation
The transceiver can be controlled remotely by operating the DTMF keys on the microphone. Fre-
quencies can also be entered directly from the microphone.
LOCK DTMF
2
OFF OFF
1.
Enter the remote command or the frequency.
2.
Press LOCK to prevent the transceiver from accepting remote control inputs from
the microphone.
3.
To operate remote control, press REMOTE.
[List of Remote Control Keys]
Key
Transceiver corresponding key
0-9
–
A
V/M
B
CALL
C
SET mode
D
FUNC+TS / DCS
Press and hold SQL
*
#
–
0
H/L
Note 1: To change the set mode menu, press the UP and DOWN keys at the top. To change its
contents, press the * and # keys. Press any key other than the * or # key to return to the
frequency display.
Note 2: To change the auto dialer memory, press the UP and DOWN keys at the top. The numbers
can be entered directly by pressing the numerical keys; the numbers or symbols can also
be selected by pressing the * and # keys and entered by pressing the A key. Press C to clear,
and the B, D, or PTT key to return to the frequency display.
1
3
Function
Direct frequency input
Memory channel access
Call channel access
SET mode access (Note 1)
Auto dialer memory registration (Note 2)
Monitor function
–
Switching transmission output
8. PACKET OPERATION
Page
–
17
19
21
30
19
–
20
39