Part Names And Functions; Front Panel - Alinco DR-635T Instruction Manual

Part Names and Functions

Front Panel

•Primary Functions
No. Key
1 PWR key
2 Main VOL knob Adjusts the volume level on the MAIN band.
3 Sub VOL knob
4 Main TX/RX
5 Sub RX lamp During reception on the SUB, illuminates in Green.
6 V/M/MW
7 Dial
8 BAND/VVUU Switches the MAIN band to VHF or UHF.
9 CALL/RX BAND
10 MHZ/SHIFT
11 TSDCS/LOCK Sets the tone squelch and DCS setting.
12 HL/ PACKET Switches HI/MID/LOW of transmission power.
13 SQL/DIGITAL Sets the squelch level.
14 FUNC/SET
15 Mic. Connector Connection for the provided microphone.
• Functions which can be activated while [F] appears, after pressing the FUNC Key
No. Key
6
8
9
10 MHZ/SHIFT
11 TSDCS/LOCK
12 HL/PACKET Accesses the packet communication mode or the
13 SQL/DIGITAL Accesses the digital voice communication mode.
* [F] illuminates when the FUNC key is pressed.
6 2
MW
V/M
MAIN
4
TX/RX MAIN
VOL
VV/UU RX BAND
BAND CALL
7 8 9
Function
Power turns ON/OFF whenever switch is pressed.
Adjusts the volume level on the SUB band.
During transmission on the MAIN band, illuminates in
indicator
Red, and during reception illuminates in Green.
Switches between VFO mode and memory mode.
Changes the frequency, memory channel and various settings.
In VFO mode, changes frequency in 1 MHz steps.
Sets functions.
Function
V/M/MW
Write a to memory channel.
BAND/VVUU Switches to VV/UU mode.
CALL/RXBAND Switches reception bands.
Sets the shift direction and the offset frequency.
Sets the key lock function.
geolocating communication mode.
3
SUB
VOL
SHIFT LOCK PACKET DIGITAL
SET
MHz TS/DCS H/L SQL FUNC
10 11 12 13 14
1
PWR
SUB
5
RX
15
11