Specifications - Alinco DR-135T MkII Instruction Manual

12. Specifications

General
Frequency range
Operationg mode
Frequency resolution
Memory channel
Ant. impedance
Frequency stability
Microphone impedance
Rated voltage
Current
Operating temperature
Ground
Dimensions
Weight
Transmitter
Power output
Modulation
Spurious emission
Maximum frequency deviation
Receiver
Circuitry
Sensitivity
Intermediate
frequency
Squelch sensitivity
Selectivity (-6 dB)
Selectivity (-60 dB)
Audio output
Note : All specifications are subject to change without notice or obligation.
44
DR-135TMK
TX144-147.995 MHz
RX118-135.995 MHz (AM)
136-173.995 MHz
16K0F3E (FM) /8K50F3E (Narrow-FM), F1, F2
5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz
100 channels + 1call channel
50 ohm unbalanced
+/- 2.5 ppm
2 k ohm
13.8 VDC +/-15% (11.7-15.8V)
Transmit approx. 11.0 A
Receive approx. 600 mA (Max) 400 mA (Squelched)
-10 ˚C - +60 ˚C (+14 ˚F - +140 ˚F)
Negative ground
142(W) x 40(H) x 174(D) mm
(5.58"(W) x 1.57"(H) x 6.83"(D))
Approx. 1.0 kg (35.3oz)
50W (HI)
10W (MID)
Approx. 5W (LOW)
Variable reactance
-60 dB or less
+/-5 kHz / +/-2.5 kHz (Narrow mode)
Double-conversion superheterodyne
-12.0 dBu (0.25 uV) or less
(12 dB SINAD)
1st IF 21.7 MHz
2nd IF 450 kHz
-16.0 dBu (0.1uV)
12 kHz or more / 6 kHz or more (Narrow mode)
28 kHz or less / 16 kHz or less (Narrow mode)
2.0 W (8 ohm, 10% distortion)