Part Names And Functions; Front Panel - Alinco DR-135TMkIII Instruction Manual

4. Part Names and Functions

Front Panel

14
10 11
12
•Primary Functions
No. Key Function
1 PWR Power turns ON / OFF whenever the key is pressed.
2 Volume knob Adjusts the AF audio level.
3 Dial Changes the frequency, memory channel and scan direction.
4 FUNC/SET
Sets the function mode to access additional settings.
5 V/M/MW
Switches between VFO mode and memory mode.
6 MHZ/SHIFT
Changes the frequency in 1 MHz steps.
7 TS/DCS/LOCK Sets the tone squelch and DCS setting.
8 CALL/H/L
Switches to CALL mode.
9 SQL/D
Sets the squelch level
10 DATA Terminal
Used in clone and theft alarm functions.
11 TX Light indicator Lights during transmission.
12 Mic. Connector Connection port for supplied microphone.
• Functions which can be activated while F appears, after
pressing the FUCN Key.
No. Key Function
4 FUNC/SET Confirms selection of other functions and exits the function mode.
5 V/M/MW Programs the data in to memory channel.
6 MHZ/SHIFT Sets the shift direction and the offset frequency.
7 TSDCS/LOCK Sets the key lock function.
8 CALL/H/L Switches between HI, MID, and LOW power transmission.
9 SQL/D Accesses the packet communication mode. (T/E models only)
AM reception(DR-235TMk only)
4 5 6 7
2
8 9 3
1