Part Names And Functions; Front Panel - Alinco DR-620T Instruction Manual

Part Names and Functions

Front Panel

6 2
MW
V/M
MAIN
4
MAIN
TX/RX
VOL
7
•Primary Functions
No. Key Function
1 PWR key Power turns ON/OFF whenever switch is pressed.
2 Main VOL knob Adjusts the volume level on the MAIN band.
3 Sub VOL knob Adjusts the volume level on the SUB band.
4 Main TX/RX
During transmission on the MAIN band, illuminates in
indicator Red, and during reception illuminates in Green.
5 Sub RX lamp During reception on the SUB, illuminates in Green.
6 V/M/MW
Switches between VFO mode and memory mode.
7 Dial
Changes the frequency, memory channel and various settings.
8 BAND/VVUU Switches the MAIN band to VHF or UHF.
9 CALL/RX BAND Switches to CALL Mode.
10 MHZ/SHIFT
In VFO mode, changes frequency in 1 MHz steps.
11 TSDCS/LOCK Sets the tone squelch and DCS setting.
12 HL/ PACKET Switches HI/MID/LOW of transmission power.
13 SQL/DIGITAL Sets the squelch level.
14 FUNC/SET
Sets functions.
15 Mic. Connector Connection for the provided microphone.
• Functions which can be activated while [F] appears, after pressing the FUNC Key
No. Key Function
6 V/M/MW
Write a to memory channel.
8 BAND/VVUU Switches to VV/UU mode.
9 CALL/RXBAND Switches reception bands.
10 MHZ/SHIFT Sets the shift direction and the offset frequency.
11 TSDCS/LOCK Sets the key lock function.
12 HL/PACKET Accesses the packet communication mode or the
geolocating communication mode.
13 SQL/DIGITAL Accesses the digital voice communication mode.
* [F] illuminates when the FUNC key is pressed.
VHF/UHF TWIN B VHF/UHF TWIN BAND FM AND FM TRANSCEVER TRANSCEVER
VV/UU RX BAND SHIFT LOCK PACKET
BAND CALL MHz TS/DCS H/L
8 9 10 11 12
3 1
DR-620 DR-620
PWR
SUB
SUB RX
VOL
DIGITAL SET
SQL FUNC
13 14
5
15
11