Microphone, Speaker, Or Handset/Dialer Not Connecting To Wireless Base Unit; Microphone, Speaker, Or Handset/Dialer Not Paired With Wireless Base Unit - Aastra S850i Administrator's Manual

Troubleshooting
Microphone, Speaker, or Handset/Dialer Not Connecting to Wireless Base
Unit
If any of the components of the S850i Wireless Conference Phone System indicate that they are searching for the Wire-
less Base Unit, or lost the connection to the Wireless Base Unit, please follow these steps:
1. Is the Wireless Base Unit powered up? The Status LED on the back of the Wireless Base Unit should have green double flashes about
every second. If not, please power up the Wireless Base Unit. All components should automatically connect to the Wireless Base
Unit after a few seconds.
2. The Wireless Base Unit is powered up, but the Status LED indicates a fault has happened by missing every fifth green double flash.
Power down and power up the Wireless Base Unit. All components should reconnect to the Wireless Base Unit after a few seconds.
The fault message in the Wireless Base Unit will continue (every fifth double flash is skipped) – this just shows that a fault has
happened in the past and can be ignored. If the components still do not connect to the Wireless Base Unit please contact Aastra
Support.
3. Are the Handset/Dialer, Microphone, and Speaker out of reach of the Wireless Base Unit? Please bring the components closer to
the Wireless Base Unit to see whether this resolves the issue.
4. Power down the Wireless Base Unit, the Microphones, the Handset/Dialer, and the Speaker. Now power up the Wireless Base Unit.
Once the Wireless Base Unit is powered up (double green flashes of the Status LED), power up the Handset/Dialer, and then the
Microphones and the Speaker. The components should now connect to the Wireless Base Unit.
5. If the components still do not connect to the Wireless Base Unit, please re-pair the components that have not connected to the
Wireless Base Unit, beginning with the Handset/Dialer. Pair of components to the Wireless Base Unit is explained in "Pairing" on
page 60.
6. If the components still do not connect to the Wireless Base Unit, please contact Aastra support.
Microphone, Speaker, or Handset/Dialer Not Paired with Wireless Base
Unit
Please follow the procedures in "Pairing" on page 60
Wireless Base Unit.
88
on how to pair the different components with the
for information
41-001516-00 REV00 – 06.2013