Calling A Directory Contact; Active Call Management - Aastra S850i Administrator's Manual

Wireless conference phone system

Hide thumbs Also See for S850i:

Table of Contents

Calling a Directory Contact

A directory contact can be called in one of two ways:

•

Browse to contact menu: Menu > Contacts. Select the contact, and press the green "Call" key.

•

Browse to contact menu: Menu > Contacts. Select the contact, and press the "Enter" key or the "View" key. From the contact view

screen, press the green "Call" key.

The S850i System has many call features that can be used when receiving or making phone calls. These features can be

controlled via the S850i Handset/Dialer during the call.

Caller ID

If the incoming caller is in the Contact List, Caller ID will display both name and number of the incoming contact.

If the incoming caller is not in the Contact List, Caller ID will display the incoming information from the network, which might include

the telephone number and Caller ID.

Note:

An incoming Bluetooth call will display caller ID information as well if it is presented by the network.

41-001516-00 REV00 – 06.2013

Managing A Call

Table of Contents