Aastra S850i Administrator's Manual page 78

Web Interface
Call Settings
From the Call Settings page you can choose to automatically answer calls, set the maximum call duration, and enable or
disable the S850i Handset/Dialer's message waiting indicator. The figure below shows the Call Settings page. After
changing any of these settings, the phone must be restarted for the changes to take effect.
Call Settings
Auto-answer This option allows to automatically answer calls even if not physically at the location where the phone is located. We
recommend enabling this feature only for test purposes.
Enable auto-answer to automatically answer incoming calls. If the phone is set to Do Not Disturb or if there are no avail-
able lines, the Forward rules will apply. If there are no Forward rules specified, the incoming call will be sent to voice
mail. If voice mail is not supported, the call will be rejected.
Maximum call duration Specify the maximum call duration in seconds. When the call duration reaches the maximum duration, the call will be
automatically terminated. An empty field indicates no maximum.
Enable message waiting indi- Select this option to display the message waiting indicator (MWI) on the S850i Handset/Dialer and to enable message
cation waiting notifications from the SIP Call Server. The SIP Call Server must be configures to support voice mail for the reg-
istered user in order for this feature to work properly.
Advanced Audio Settings
Use the Advanced Audio Settings page to specify Microphone mute behavior, AUX audio in and out settings, and Acous-
tic Echo Cancellation (AEC) settings. The illustration below shows this page. The settings and options on this page reflect
the same settings as can be done on the Handset/Dialer, allowing remotely setting and managing the phone behavior.
Any changes on this page take effect as soon as the settings are saved; it is not necessary to restart the phone, but it is
necessary to press "Save" for the change to be taken into the phone.
78
41-001516-00 REV00 – 06.2013