Aastra S850i Administrator's Manual page 58

S850i System Configuration
RF Power
The RF Power level setting allows changing the signal strength of the Wireless Base unit and Microphones. Factory
default is HIGH. Low or medium can be selected to reduce the signal strength. Lower signal strength reduces the maxi-
mum distance between Wireless Base Unit and any of the wireless devices. A lower setting might be desirable in environ-
ments where a lot of DECT traffic is encountered.
1. Browse to the RF Power menu: Setup > Advanced Setup> RF Power.
2. The user can adjust the RF Power from low to high.
Admin Settings
The Admin Settings menu allows changing settings that are related to general system settings.
58
41-001516-00 REV00 – 06.2013