Aastra S850i Administrator's Manual page 61

Wireless conference phone system
Hide thumbs Also See for S850i:
Table of Contents

Advertisement

Speaker
1.
To pair a Speaker first turn it off by pressing and holding the button on the bottom of the Speaker until you hear the Speaker shut-
off or the LEDs turn off.
2.
Ensure that the Wireless Base Unit is plugged in and powered up.
3.
On the Handset/Dialer, browse to the Pairing menu: Menu > Setup > Advanced Setup > Pairing.
4.
Select SPK 1 (Speaker 1) and press the "Enter" or "Pair" key to enter pairing state.
5.
The screen will display "Pairing Speaker 1".
6.
Press and hold the button on the bottom of the Speaker until the LED turns solid red. The Speaker is now in pairing mode.
7.
After a short time an overlay will appear on the S850i Handset/Dialer saying "Pairing Successful", after which the screen should read
"SPK 1 Linked".
8.
If pairing was unsuccessful, the Speaker will show an alternating red -green slow blinking sequence indicating that the pairing
failed. The Handset/Dialer will display a "Pairing Timeout" message. In that case the pairing procedure should be repeated.
Microphone
1.
To pair a Microphone, turn off the Microphone by holding the mute button until the LED turns red if it is not already turned off.
2.
Ensure that the Wireless Base Unit is plugged in and powered up.
3.
On the Handset/Dialer, browse to the Pairing menu: Menu > Setup > Advanced Setup > Pairing.
4.
Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the "Enter" key to enter pairing state.
5.
The screen will display "Pairing Mic 1" or "Pairing Mic 2" depending on which Microphone you are pairing.
6.
Press the mute button on the Microphone and hold it until the LED turns solid red. The Microphone is now in pairing mode.
7.
After a short time an overlay will appear on the Handset/Dialer "Pairing Successful", after that the screen should read "MIC 1 Linked"
or "MIC 2 Linked", based on which one you were pairing.
8.
If pairing was unsuccessful, the Microphone will show an alternating red - green slow blink sequence, indicating that the pairing
failed. The Handset/Dialer will display a "Pairing Timeout" message. In that case the pairing procedure should be repeated.
LED Pairing Indicators
Speaker Indicator
Status
Steady Red
Speaker is in Pairing Mode, either waiting or pairing in progress
Slow red- green flash
Pairing failed or timed out
Green flash
Pairing successful
Microphone Indicator
Status
Steady Red
Pairing Mode, either waiting or pairing in progress
Slow red- green flash
Pairing failed or timed out
Green flash
Pairing successful
41-001516-00 REV00 – 06.2013
S850i System Configuration
61

Advertisement

Table of Contents
loading

Table of Contents