Table of Contents
Advertisement
4.13 Maintenance
You can do some maintenance job about this IP camera here.
Here are the descriptions of every setup item:
Item
Reboot
Reset
Backup
Restore
Restore from SD
card device
Upgrade
Description
Click this button to reboot the IP camera. This function is useful
when you find IP camera is not working properly.
Clear all settings of IP camera and reset to factory default setting.
Backup IP camera's setting and save it on your computer.
Restore a previously-saved configuration file saved on your
computer. Click 'Browse' button to select a file on your computer
first, then click 'Restore' button.
Restore IP camera's configuration which is previously-saved on SD
card.
Upgrade IP camera's firmware. Click 'Browse' button to select a
firmware image file on your computer first, then click 'Upgrade'
button.
76
Advertisement
Table of Contents
