Table of Contents
Advertisement
Motion Detection
Digital Input
1 ~ 2
Enable Schedule
Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD CARD
Trigger digital
output for xx
second(s).
(no spaces allowed).
Check this box and this event will be activated when one of motion
detection window detects motion.
Check this box and this event will be activated when digital input 1 or
2's input signal is high or low (select from dropdown list).
Check this box and this event will be activated when designated
weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select 'Always' as time, this event will be
activated during all the day.
Check this box and IP camera will save file on FTP server (refer to
'FTP Server' setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will send an Email to designated
recipient address (refer to 'SMTP Server' setting in 'Event Server'
tab) when this event is activated.
Check this box and IP camera will save file on samba server (refer to
'Samba Server' setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will save file on SD card when this
event is activated. A working SD card must be inserted into IP
camera in advance.
Check this box and IP camera will trigger digital out to 'high' state for
xx seconds when this event is activated, where 'xx' seconds must be
defined by the dropdown list.
67
Advertisement
Table of Contents
