Table of Contents
Advertisement
NTP Sync. Interval
Time Zone
Daylight Saving
Daylight Saving
Start Time
Daylight Saving
Stop Time
Daylight Saving
Offset
3.7.3 Maintenance
Default Settings
(Including the network
setting)
Default Settings
(Except the network
setting)
Backup Setting
5 Mega-Pixel 20M IR Vari-Focal Dome IP Camera
Select an interval between 1 and 23 hours at which you want to
adjust the device's time referring to NTP server
Set the time difference from Greenwich Mean Time in the area
where the device is installed.
Check this item to enable daylight saving adjustment.
Sets up the date and time of daylight saving start time.
Sets up the date and time of daylight saving stop time.
Sets up the date of daylight saving offset.
Recall the device hard factory default settings. Note that by
clicking this button, it will reset all device's parameters to the
factory settings (including the IP address).
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.
To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous
61
ICA-4500V
Advertisement
Table of Contents
