Table of Contents
Advertisement
Rear Panel
WPS/ Reset Button
Power Connector
Audio Connector
Button Description
Button
WPS
Reset
Physical
Interfaces
Connector
Power Connector
Audio Connector
DI/DO
Function
Press the WPS button and hold it for 3 seconds to enable the WPS
function, the LED will flashed very fast which means connecting. When
connect with the router, the LED flashed will be slow down means
connect successful.
Press the button and hold it for 10 second to reset the camera settings to
factory default value
Function
The input power is 12VDC, 2A.
Connects to external audio amplifier to output voice. Use 3.5mm audio cable.
Digital input / output dry contacts.
Connects to external peripherals by
wire. To insert or release a wire, press
the button of the PIN you wish to insert
or release.
Antenna Base
SD/ SDHC Card Slot
DI/DO PIN ASSIGNMENT
Description
Item
Signal ground (Right)
GND
Digital Output #1
DO
Digital Input #1
DI1
Digital Input #2(Left)
DI2
DI/ DO
LAN
11
Advertisement
Table of Contents
