Table of Contents
Advertisement
4.5.1 Image Setting
You can adjust the image parameters in this page.
Here are the descriptions of every setup item:
Item
Description
Brightness /
Control the image parameters. Click ' - ' to decrease value, or click ' +
Contrast /
' to increase value. You can also input the value in the field directly.
Saturation /
Sharpness
Default
Set all above values to default value '128'.
Mirror
Check 'Vertical' or 'Horizontal' box to flip the image vertically or
horizontally, this will help to correct the orientation of image when IP
camera is hanged bottom-up by camera holder. You can click both
'Vertical' and 'Horizontal' box at the same time.
53
Advertisement
Table of Contents
