Maintenance - Planet ICA-2200 User Manual

Daylight Saving
Offset

6.3.3. Maintenance

Default Settings
(Include the network
setting)
Default Settings
(Except the network
setting)
Backup Setting
Restore Setting
Firmware upgrade
1. Close all other application programs which are not necessary for firmware
update.
2. Make sure that only you access this device at this moment
Sets up the date of daylight saving offset.
Recall the d evice hard factory default settings. Note that click
this button will reset all device's parameters to the factory
settings (including the IP address).
The unit is restarte d and most cu rrent settings a re reset to
factory default val ues. This action will not reset the network
setting.
To take a ba ckup of all of the par ameters, click this button. If
necessary, it will then be
settings, if settings are cha
behavior.
Click the "Browse" button to loc ate the s aved backup file and
then click the "Restore Setting" b utton. The settings will be
restored to the previous configuration.
The device supports new firmware upgrade.
50
User's Manual of ICA-2200
possible to return to the previou s
nged and there is u nexpected