Table of Contents
Advertisement
4.3.3 Wireless
In this menu, you can configure IP camera's wireless network setting.
The descriptions of every setting in this menu will be given below:
Item
Wireless Connection
Network Type
Available Networks
Description
Select "Enable" to activate wireless network function of this IP
camera, select "Disable" to disable it.
Select the network type of wireless connection.
Infrastructure :Connect the IP camera to a wireless access point
Adhoc :This IP camera will become a stand-alone wireless network
point, other wireless computers / devices can discover this IP camera
and connect to it without wireless access point.
Here shows all wireless access points found by this IP camera. Please
note not all access points will be displayed at the same time, if the
access point you expected to connect does not appear, you may have
to click "Refresh" button for several times until it appears.
The description of all fields is listed below:
Connect: You can select the wireless access point you wish to
connect here.
SSID: the SSID of all found wireless access points will be shown here.
Some wireless access point may hide their SSID; in this case, you
have to identify them by their MAC address.
MAC Address: If you there are many wireless access points in
proximity or some wireless access point hides it's SSID, you can use
MAC address to distinguish them.
Signal: Shows the radio signal strength in percent.
47
Advertisement
Table of Contents
