Table of Contents
Advertisement
Item
Pan-tilt control
Pan Speed
Tilt speed
Set home
Calibration
Preset list
Patrol Setting
When you finish, click 'Apply' button
Description
Control pan-tilt of camera by click up, down, left, right and upper-left/right,
lower-left/right.
Adjust the pan speed. It should be an integer between 1 (slower) to 10
(faster).
Adjust the tilt speed. It should be an integer between 1 (slower) to 10 (faster).
Click this button to set current position as home position.
To calibration its direction and focus to its "Factory Default Position", to
ensure its preset position will be located at the correct position without
deviation after a period of usage.
This IP camera supports up to 8 preset points. You can move camera to
preset point, and camera will stop there for a specific amount of time. You
can specify up to 8 preset points.
To set a preset point:
Move camera to the preset point you wish to set by pan-tilt control.
Select a preset point from the list (1 to 8)
Input a text description for this preset point (this is optional, up to 16
characters).
Input dwelling time (0 to 30**, seconds)
Click 'Set' to save current preset point.
You can click 'GO Preset' button to move camera to preset point, or click
'Remove' to clear this preset point setting.
When you have 2 or more preset points, you can make camera to move
between these points, this function is called as 'Patrol'.
To configure patrol, please setup preset points first, then select preset points
from 'Preset list' and click
preset point from patrol list, select it in patrol list and click
You can also adjust the order or preset points in patrol list: select a preset
point and click
or
button to add it to 'Patrol' list; to remove a
button.
button.
63
Advertisement
Table of Contents
